How to start an oil production business
An oil pressing unit is a great way to earn good money. In India different types of oils are used in different parts of the country. Different types of machines are required for extracting oil from different oil seeds.
This is why if you want to get into
the edible oil production business then you should first understand the oil
extractor machine and the commercial oil machine dealer you should
buy it from. Let us look at what you need to know before you set out to buy an
oil machine.
Identify the raw material
There are a lot of seeds and nuts from
which edible oil can be extracted. You should know which raw material you are
going to use. This is because each material has a specific requirement which
should be met capacity wise. Hence if you want to extract oil from mustard
seeds then you should opt for a mustard extractor machine.
Understand the process
The oil seeds are first cleaned and
then crushed into smaller pieces. The third step is to heat the seeds before
pressing which will increase the amount of oil extracted by the machine. This
is done by adjusting the temperature and water.
The oil mills then press the oil seeds
prepared in the above mentioned method. Pressing is considered to be the most
important process in the mass production of edible oils. Once the oil seeds are
pressed they will yield oil which is filtered to remove the impurities.
Refining of the oil obtained by the
above process, is important because it removes the harmful chemicals and
produces healthy edible oil.
Know the capacity requirements
A typical oil mill has a capacity of 1
TPD to 5000 TPD, however, as a manufacturer you can adapt to the amount of oil
to be produced. A good commercial oil machine dealer will
have tie-ups with different manufacturers and will be able to provide you with
what exactly you require. For instance, for groundnut and cotton seed oil, the
shells have to be removed first.
This process is not complicated and
whether you want a mustard extractor machine or an oil machine for any other
purpose, then you should opt for a good manufacturer and dealer.
Comments
Post a Comment